Other PHM Papers

2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 and prior | Others

2007

A Built-in Active Sensing System-Based Structural Health Monitoring Technique Using Statistical Pattern Recognition, S. Park, J. Lee, C. Yun and D. Inman, Journal of Mechanical Science and Technology, Vol. 21, pp. 896-902, 2007.

Electronic Prognostics 〞 Engineering Capability, P. Kalgren and P. Dussault, Proceedings of the 32nd GOMACTech Conference, Lake Buena Vista, FL, March 19-22, 2007.

Energetic Material/Systems Prognostics, D. Han, M. Pecht, D. Anand, and R. Kavetsky, 53rd Annual Reliability & Maintainability Symposium (RAMS), Florida, 2007.

An Enhanced Prognostic Model for Intermittent Failures in Digital Electronics, G. Zhang, C. Kwan, R. Xu, N. Vichare, and M. Pecht, IEEE Aerospce Conference, Big Sky, MT, March 2007.

Prognostics Implementation Methods for Electronics, J. Gu, N. Vichare, T. Tracy, and M. Pecht, 53rd Annual Reliability & Maintainability Symposium (RAMS), Florida, 2007.

Embedded Diagnostics Enable Military Ground Vehicle Autonomic Logistics, J. Banks and E. Crow, 53rd Annual Reliability & Maintainability Symposium (RAMS), Florida, 2007.

Real Time Consequence Engine, D. Briand, and J. Campbell, 53rd Annual Reliability & Maintainability Symposium (RAMS), Florida, 2007.

Electronic Prognostics for Computer Servers, A. Urmanov, 53rd Annual Reliability & Maintainability Symposium (RAMS), Florida, 2007.

Cost Benefit Analysis for Asset Health Management Technology, J. Banks and J. Merenich, 53rd Annual Reliability & Maintainability Symposium (RAMS), Florida, 2007.

Integrated Management of System Health in Space Applications, K. Reichard, E. Crow, and T. Bair, 53rd Annual Reliability & Maintainability Symposium (RAMS), Florida, 2007.

Diagnostics To Prognostics - A Product Availability Technology Evolution, K. Janasak and R. Beshears, 53rd Annual Reliability & Maintainability Symposium (RAMS), Florida, 2007.

 

2006

Accelerated Vibration Testing Based on Fatigue Damage Spectra, A. Halfpenny, Proceedings of the Aerospace Testing Expo 2006, Hamburg, Germany, Europe, April 4-6, 2006.

Prognostic Assessment of Aluminum Support Structure on a Printed Circuit Board, S. Mathew, D. Das, M. Osterman, M. Pecht, and R. Ferebee ASME Journal of Electronic Packaging, Vol. 128, Issue 4, pp. 339-345, December 2006.

Evaluation of a Vibration-Powered, Wireless Temperature Sensor for Health Monitoring, George, S. E., Bocko, M., and Nickerson, G. W., Proceedings of the 2006 Aerospace IEEE Conference, pp. 1-7, 2006.

Aircraft Electrical Power Systems Prognostics and Health Management, Keller, K., Swearingen, K., Sheaham, J., Bailey, M., Dunsdon, J., Przytula, K. W. and Jordan, B., IEEE, paper #1380, pp. 1-12, 2006.

Environment and Usage Monitoring of Electronic Products for Health Assessment and Product Design, N. Vichare, P. Rodger, V. Eveloy, and M. Pecht, International Journal of Quality Technology and Quantitative Management, In press, 2006.

A Methodology for Assessing the Remaining Life of Electronic Products, S. Mathew, P. Rodgers, V. Eveloy, N. Vichare, and M. Pecht, International Journal of Performability Engineering, Vol. 2, No. 4, pp. 383-395, October, 2006.

Enabling Electronic Prognostics Using Thermal Data, N. Vichare and M. Pecht, Proceedings of the 12th International Workshop on Thermal Investigation of ICs and Systems, Nice, Cote d'Azur, France, 27-29 September 2006.

Methods for Binning and Density Estimation of Load Parameters for Prognostics and Health Management, Vichare N., Rodgers P., and Pecht, M., International Journal of Performability Engineering, Vol. 2, No. 2, April 2006.

Prognostics and Health Management of Electronics, N. Vichare and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 29, No. 1, March 2006.

Evaluation of a Vibration-Powered, Wireless Temperature Sensor for Health Monitoring, George, S. E., Bocko, M., and Nickerson, G. W., Proceedings of the 2006 Aerospace IEEE Conference, pp. 1-7, 2006.

2005

A CMOS Watch-Dog Sensor for Guaranteeing the Quality of Perishables, Ueno, K., Hirose, T., Asai, T., and Amemiya, Y., Sensors, 2005 IEEE,, Vol. 30, pp. 1209-1212, November, 2005.

Data Selection and Condensation and Recognition Processes for Damage Identification of Structures Using Limited Number of Sensors, Qian, Y., and Mita, A., The Japanese Construction Academic Society Conference Scientific Lecture Summary Collection (Kinki), B-2, pp. 11-12, 2005.

Unsupervised Statistical Damage Diagnosis for Structural Health Monitoring of Existing Civil Structures, Iwasaki, A., Todoroki, A., Sugiya, T., Izumi, S., and Sakai, S., Smart Materials and Structures, vol. 14, pp. S154-S161, 2005.

Bayesian Approach to Diagnosis and Prognosis Using Built-In Test, Sheppard, J. W., and Kaufman, M. A., IEEE Transactions on Instrumentation and Measurement, June 2005, vol. 54, no. 3, pp. 1003-1018, 2005.

Dynamic System Characterization of Enterprise Servers via Nonparametric Identification, Schuster, E., and Gross, K. C., Proceedings of the American Control Conference, vol. 4, pp. 2756-2761, June, 2005.

Prognostics and Health Management of Electronic Packaging, Lall, P., Islam, M. N., Rahim, M. K., and Suhling, J. C., IEEE Transactions on Components and Packaging Technologies, pp. 1-12, 2005.

A Method for Correlating Field Life Degradation with Reliability Prediction for Electronic Modules, Coit, D. W., Evans, J. L., Vogt, N. T., and Thompson, J. R., Proceedings of Reliability and Maintainability Symposium, vol. 21, pp.715每726, 2005.

Dynamic Case-Based Reasoning in Fault Diagnosis and Prognosis, Berenji, H., Wang, Y. and Saxena, A., Proceedings of the 2005 IEEE International Conference on Fuzzy Systems, pp. 845-850, 2005.

A Methodology for Analyzing Vibration Data from Planetary Gear Systems using Complex Morlet Wavelets, Saxena, A., Wu, B. and Vachtsevanos, G., Proceedings of the 2005 American Control Conference (ACC 2005), Portland OR, pp. 4730-4735, June 8-10, 2005.

Prognostication and Health Monitoring of Leaded and Lead Free Electronic and MEMS Packages in Harsh Environments, Lall, P., Islam, N., Suhling, J., Proceedings of the 55th IEEE Electronic Components and Technology Conference, Orlando, FL, pp. 1305-1313, June 1-3, 2005.

Recent Advancements in Aircraft Engine Health Management (EHM) Technologies and Recommendations for the Next Step, Jaw, L. Proceedings of Turbo Expo 2005: 50th ASME International Gas Turbine & Aeroengine Technical Congress, Reno-Tahoe, Nevada, pp. 1-13, June 6-9, 2005.

Enterprise Remote Monitoring (ICAS & Distance Support), Tomorrow's Vision Being Executed Every Day, Savage, C., DiUlio, M., Finley, B., Krooner, K., Martinez, P. and Horton, P., Proceedings of the 2005 ASNE Fleet Maintenance Symposium, 2005.

Material Simulation-Based Electronic Device Prognosis, Nasser, L., Tryon, R. and Dey, A., Proceedings of the 2005 IEEE Aerospace Conference, pp. 1-6, 2005.

Electronic Prognostics每A Case Study Using Global Positioning System (GPS), Brown, D. W., Kalgren, P. W., Byington, C. S. and Orsagh, R. F., Proceedings of the IEEE AUTOTESTCON Conference, pp. 833-839, 26-29 September, 2005.

Prognostic Health Management for Avionics System Power Supplies, Orsagh, R., Brown, D., Roemer, M., Dabney, T., and Hess, A., Proceedings of the 2005 IEEE Aerospace Conference, pp. 1-7, 2005.

Structural Integrity Monitoring of Steam Generator Tubing Using Transient Acoustic Signal Analysis, Lu, B., Upadhyaya, B. R., and Perez, R. B., IEEE Transactions on Nuclear Science, vol.52, No.1,pp. 484-493, February 2005.

An Improved Hilbert-Huang Transform and its Application in Vibration Signal Analysis, Peng, Z. K., Tse, P. W. and Chu, F. L., Journal of sound and vibration, vol. 286, Isuue 1-2, pp. 187-205, August 2005.

Investigation into Piston-Slap-Induced Vibration for Engine Condition Simulation and Monitoring, Geng, Z., and Chen, J., Journal of Sound and Vibration, vol. 282, 22, pp. 735-751, April 2005.

Integrated FRACAS Systems for F117 Infrared Acquisition Designation System (IRADS) Support Yield Higher MTBMA, Mukherjee, A., Proceedings of the Reliability and Maintainability Symposium, pp. 26-29, 2005.

PHM as a Design Variable in Air Vehicle Conceptual Design, Bodden, D. S., Hadden, W., Grube, B. E. and Clements, N. S., Proceedings of the 2005 IEEE Aerospace Conference, pp. 1-11, 2005.

A Systematic Approach for Developing Prognostic Algorithms on Large Complex Systems, Line, J. K. and Clements, N. S., Proceedings of the 2005 IEEE Aerospace Conference, pp.1-7, 2005.

Practical Application of PHM/Prognostics to COTS Power Converters, Goodman, D. L., Vermeire, B., Spuhler, P. and Venkatramani, h., Proceedings of the 2005 IEEE Aerospace Conference, pp.1-6, 2005.

Similarity-based Modeling of Vibration Features for Fault Detection and Identification, Wegerich, S., Sensor Review, pp. 114-122, 2005.

Effect of Current Crowding and Joule Heating on Electromigration-induced Failure in Flip Chip Composite Solder Joints Tested at Room Temperature, Nah, J. W., Suh, J. O. and Tu, K. N., Journal of Applied Physics, vol. 98, 013715, 2005.

FUMS Artificial Intelligence Technologies Including Fuzzy Logic For Automatic Decision Making, Wakefield, N. H., Knight, P. R., Brayant, K. P. J. and Azzam, H., 2005 Annual Meeting of the North American Fuzzy Information Processing Society, pp. 25-30, 2005.

Compressor Maintenance Expense Cut Using Remote Condition Monitoring, Holtan, T. P., Pipeline and Gas Journal, pp. 22-23, Feb 2005.

Proactive Fault Monitoring in Enterprise Servers, Whisnant, K., Gross, K., and N. Lingurovska, Proceedings of the IEEE International Multi-conference on Computer Science and Computer Engineering, Las Vegas, NV, Jun. 27-30, 2005.

A Decision Support Model for Determining the Applicability of Prognostic Health Management (PHM) Approaches to Electronic Systems, P. Sandborn, Proc. Reliability and Maintainability Symposium pp. 422-427, January 24-27, 2005.

Corrosion and Corrosivity Monitoring System, Braunling, R. and Dietrich, P., Proceedings of SPIE 2005, vol.5765, pp. 485-492, 2005.

Structural Health Monitoring of Bridges Using Effective Two-Step Identification Approaches, Lee, J. J., Koo, K. Y. and Yun, C. B., Proceedings of SPIE 2005, pp. 970-981, vol. 5765, 2005.

IBM's Drive Temperature Indicator Processor (Drive-TIP) Helps Ensure High Drive Reliability, Herbst, G., IBM White Paper, http://www.hc.kz/pdf/drivetemp.pdf, September 2005.

Damage Identification of a Benchmark Building for Structural Health Monitoring, Lin, S., Yang, J. and Zhou, L., Smart Materials and Structures, vol. 14, pp. S162-S169, 2005.

2004

Similarity Based Modeling of Time Synchronous Averaged Vibration Signals for Machinery Health Monitoring, S. Wegerich, IEEE Aerospace Conference, pp. 3654- 3662, 2004.

Petri Net Based Modeling Approach for Fault Affected UAV Subsystems Reconfiguration, Wang, W., Jaw, L., and Wang, Proceedings of AIAA 1st Intelligent Systems Technical Conference, Chicago, Illinois, Sep. 20-22, 2004

A Run-time Test System for Maturing Intelligent System/Vehicle Capabilities-SIDAL, Jaw, L., and Wang, W., Proceedings of the 2004 IEEE Aerospace Conference, pp. 3756-3763, March 2004.

Model-based Fault Identification of Power Generation Turbine Engines Using Optimal Pursuit, Jaw, L. and Van, H. T., Proceedings of the 2004 IEEE Aerospace Conference, pp. 3502-3506, March 2004

Practical Diagnostic Algorithms for Run-time Systems, Wang, W. and Jaw, L., Proceedings of the 2004 IEEE Aerospace Conference, pp.3476-3480, March, 2004.

Watchdog Circuit for Product Degradation Monitor Using Sub-Threshold MOS Current, Hirose, T., Yoshimura, R., Ido, T., Matsuoka, T., and Taniguchi, K., Proceedings of International Conference on Solid State Devices and Materials, pp.150每151, Sept. 2004.

Similarity Based Modeling of Time Synchronous Averaged Vibration Signals for Machinery Health Monitoring, Wegerich, S. W., Proceedings of IEEE Aerospace Conference, Big Sky, Montana, pp. 1-9, March 2004.

Efficient Data-Reduction Methods for On-Line Association Rule Discovery, Bronnimann, H., Chen, B., Dash, M., Haas, P. J., Qiao, Y., and Scheuemann, P., Chapter 4 of Selected Papers from NSF Workshop on Next-Generation Data Mining, pp. 190-208, MIT Press, 2004.

In-Vehicle Data Logging System for Fatigue Analysis of Drive Shaft, Ilic, S., Katupitiya, J. and, Tordon, M., Proceedings of the 2004 International Workshop on Robot Sensing (IEEE Cat. No.04EX796), pp. 3034, Piscataway, NJ, USA, 2004.

Residual Life Predictions from Vibration-Based Degradation Signals: A Neural Network Approach, Gebraeel, N., Lawley, M., Liu, R. and, Parmeshwaran, V., IEEE Transactions on Industrial Electronics, vol.51, no.3, pp. 694-700, June 2004.

Networked Sensing for Structural Health Monitoring, Caffrey, J., Govindan, R., Johnson, E., Krishnamachari, B., Masri, S., Sukhatme, G., Chintalapudi, K., Dantu, K., Rangwala, S., Sridharan,A., Xu, N., and Zuniga, M., Proceedings of the 4th International Workshop on Structural Control, New York, NY, pp. 57-66, June 10每11, 2004.

Overview of Wireless Sensors for Real Time Health Monitoring of Civil Structures, Lynch, J. P., Proceedings of 4th International Workshop on Structural Control and Monitoring, NY, USA, June 10-11, 2004.

IR circuit board and IC failure detection, Keenan, E., Wright, R.G., Zgol, M., Mulligan, R., Tagliava, V. and Kirkland, L.V., Aerospace and Electronic Systems Magazine, IEEE, vol. 19, no. 6, pp. 9-15, June 2004.

Organic-Based Devices for Circuit Board Testing, Wright, R. G., Zgol, M., Adebimpe, D. and Kirkland, L. V., Proceedings of AUTOTESTCON 2004, pp. 558-562, September 20-23, 2004.

Avionics Health Management: Searching for the Prognostics Grail, Kirkland, L.V., Pombo, T., Nelson, K. and Berghout, F., Proceedings of IEEE Aerospace Conference, vol. 5, pp. 3448-3454, March 6-13, 2004.

Role of BIT in Support System Maintenance and Availability, Drees, R., and Young, N., IEEE A&E Systems Magazine, pp. 3-6, 2004.

Portable Diagnostic Reasoning for Improved Avionics Maintenance and Information Capture & Continuity, Byington, C. S., Kalgren, P. W., and Donovan, B. P., Proceedings of AUTOTESTCON 2004, pp. 518-524, September 20-23, 2004.

Random and Systematic Defect Analysis using IDDQ Signature Analysis for Understanding Fails and Guiding Test Decisions, Nigh, P., and Gattiker, A., Proceedings of the International Test Conference (ITC'04), pp. 309-318, October, 2004.

Choosing the Right Power MOSFET Package, Zhang, J., White Paper, International Rectifier, http://www.irf.com/technical-info/whitepaper/mosfetpackageeepn0204.pdf, 2004.

Multi-Frequency Sinusoidal Perturbation Method for Dynamic Characterization of Multi-Processor Computer Servers, Schuster, E. and Gross, K. C., www.research.sun.com, SMLI TR-2004-130, May 2004.

Proactive Detection of Software Anomalies through MSET, Vaidyanathan, K. and Gross, K., Proceedings of the Workshop on Predictive Software Models, September, 2004.

Development of a Distributed Bearing Health Monitoring and Assessing System, Zhao, Y., Zhang, G., Du, J., Wang, G. and Vachtsevanos, G., Proccedings of the 2004 8th International Conference on Control, Automation, Robotics and Vision, Kunming, China, Dec. 6-9, 2004.

Leading Indicators-of-Failure for Prognosis of Electronic and MEMS Packaging, Lall, P., Islam, N., Rahim, K., Suhling, J., and Gale, S., Proceedings of 2004 Electronic Components and Technology Conference, pp. 1570- 1578, vol. 2, 2004.

Similarity Based Modeling of Time Synchronous Averaged Vibration Signals for Machinery Health Monitoring, Wegerich, S. W., Proceedings of the 2004 IEEE Aerospace Conference, pp. 3654-3662, 2004.

Integration of Material-Based Simulation into Prognosis Architectures, Nasser, L. and Tryon, R., Proceedings of the 2004 IEEE Aerospace Conference, pp. 3742-3747, 2004.

FUMS Technologies for Verifiable Affordable Prognostics Health Management (PHM), Azzam, H., Cook, J. and Driver, S., Proceedings of the 2004 IEEE Aerospace Conference, vol. 6, pp. 3764-3781, 2004.

Contrasting Approaches to the Validation of Helicopter HUMS-A Military User's Perspective, Cook, J., Gourlay, J., and Boardman, L., Proceedings of 2004 IEEE Aerospace Conference, pp. 3748-3755, 2004.

Trends in Advanced Motor Protection and Monitoring, Robinson, J., Whelan, C. D. and Haggerty, N. K., IEEE Transactions on Industry Applications, vol. 40, No.3, vol. 40, No.3, pp. 853-860, May/June, 2004.

Air Vehicle Integrated Diagnostics, Dreyer, S. L., Proceedings of the 2004 IEEE AUTOTESTCON, pp. 511-517, 2004.

Aircraft Electrical Power Systems Prognostics and Health Management (AEPHM), Keller, K., Amo, A. D. and Jordan, B., Proceedings of the Power Systems Conference, Reno, Nevada, Nov. 2-4, 2004.

Model-driven Development of Integrated Health Management Architectures, Ofsthun, S. C. and Wilmering, T. J., Proceedings of the 2004 IEEE Aerospace Conferencevol. 6, , vol. 6, pp.3692- 3705, 2004.

Implications of an Open System Approach to Vehicle Health Management, Followell, D., Gilbertson, D. and Keller, K., Proceedings of the 2004 IEEE Aerospace Conferencevol 5, No.3, , vol. 6, pp.3717- 3724, 2004.

Development and Use of a Miniaturized Health Monitoring Device, Rouet, V., and Foucher, B., Proceedings of the 42nd Annual International Reliability Physics Symposium, pp. 645-646, Phoenix, 2004.

A model-Based Approach to Prognostics and Health Management for Flight Control Actuators, Byington, C. s. and Stoelting, P., Proceedings of the 2004 IEEE Aerospace Conference, vol.6, pp. 3551-3562, 2004.

Metrics and Development Tools for Prognostic Algorithms, Kacprzynski, G. J., and Hess, A. J., Proceedings of the 2004 IEEE Aerospace Conference, pp. 3809-3851, 2004.

Advanced Diagnostic/Prognostic Reasoning and Evidence Transformation Techniques for Improved Avionics Maintenance, Byington, C. S., Kalgren, P. W., Dunkin, B. K. and Donovan, B. P., Proceedings of the 2004 IEEE Aerospace Conference, pp. 3424-3434, 2004.

Wireless Sensor Network for Aircraft Health Monitoring, Bai, H., Atiquzzaman, M., and Lilja, D., Proceedings of the First International Conference on Broadband Networks (BROADNETS'04), pp. 748-750, August 12, 2004.

Uncertainty Analysis of Memory Based Sensor Validation Techniques, Gribok, A. V., Urmanov, A. M. and Hines, J. W., Real-Time Systems, Kluwer Academic Publishers, vol. 27, pp. 7-26, Number 1, May 2004.

Redundant Sensor Calibration Monitoring Using Independent Component Analysis and Principal Component Analysis, Ding, J., Gribok, A. V., Hines, J. W., and Rasmussen, B., Real-Time Systems, Kluwer Academic Publishers, vol. 27, pp. 27-47, 2004.

Packaging Effects on the Performances of MEMS for High-G Accelerometer: Frequency-Domain and Time-Domain analyses, Cheng, Z., Huang, W., Cai, X., Xu, B., Luo, L. and Li, X., Proceeding of the Sixth IEEE CPMT Conference on High Density Microsystem Design and Packaging and Component Failure Analysis, pp. 282- 289, 2004.

Dynamic Response of a Plastic Encapsulated High-g MEMS Accelerometer, Yu-Qi, J., Ying-Jun, C., Wei, X., Kim, Z., Xin-Xin, L. and Le, L., Proceeding of the Sixth IEEE CPMT Conference on High Density Microsystem Design and Packaging and Component Failure Analysis, pp. 353-358, 2004.

The Integration of Vehicular Diagnostics and Prognostics with Autonomic Logistics, Scully, J. K., Proceedings of AUTOTESTCON 2004, IEEE, pp.482- 488, 2004.

Terahertz and Laser Imaging for Printed Circuit Board Failure Detection, Keenan, E., Wright, R. G., Mulligan, R. and Kirkland, L. V., Proceedings of IEEE AUTOTESTCON 2004, pp.563-569, 2004.

Measurement-based Prognostic Models for Service-induced Damage in Turbine Engine Components, Akers, D. W. and Rideout, C. A., Proceedings of IEEE Aerospace Conference, Big Sky, Montana, March 2004.

A Self-Managing Framework for Health Monitoring, Baxi, A., Kodalapura, N., ISSN 1535-864 X, vol. 10, Issue 4, pp. 313-326, November 9, 2004.

Vibration Based Condition Monitoring: A Review, Carden, E. P. and Fanning, P., Journal of Structural Health Monitoring, vol. 3, No. 4, pp. 355-377, 2004.

Service Life Prediction of Structural Systems using Lifetime Functions with Emphasis on Bridges, Yang, S., Frangopol, D.M., Neves, L.C., Reliability Engineering & System Safety, vol.86, No.1, pp. 39-51, Oct. 2004.

Monitoring Bridge Performance, DeWolf, J., Lauzon, R., Culmo, M., Journal of Structural Health Monitoring, vol. 51, No. 3, pp. 129-138, June 2004.

Vibration Fatigue Experiments of SMT Solder Joint, Wang, H., Zhao, M., and Guo, Q., Microelectronics Reliability, vol. 44, pp. 1143-1156, July 2004.

Design Optimization and Reliability of PWB Level Electronic Package, Jagarkal, S., G., Hossain, M., M., Agonafer, D.,Lulu, M. and Reh, S., Thermal and Thermomechanical Phenomena in Electronic Systems, vol.2, pp. 368-376, June 2004.

Confidence Measure Estimation in Dynamical Systems Model Input Set Selection, Deignan, P. B. Jr, King, G, B., Meckl, P. H. and Jennings, K., Proceedings of the 2004 American Control Conference, pp. 2824-2829, 2004.

Development of a Miniaturized Health Monitoring Device, Rouet, V., and Foucher, B., 42nd Annual International Reliability Physics Symposium, pp. 645-646, Phoenix, 2004.

Miniaturized Health Monitoring Device, Foucher, K. B., 004 International Reliability Physics Symposium, April 25-29, 2004.

In Situ Temperature Measurement of a Notebook Computer - A Case Study in Health and Usage Monitoring of Electronics, N. Vichare, P. Rodgers, V. Eveloy, and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 4., No. 4, pp. 658-663, December 2004.

Prognostics and Health Management for Improved Dispatchability of Integrated Modular Avionics Equipped Aircraft, C. Wilkinson, 23rd Digital Avionics Systems Conference (DASC), Salt Lake City, UT, October 2004.

Application of Health Monitoring to Product Take-back Decisions, N. Vichare, P. Rodgers, M. Azarian, and M. Pecht, Proceedings of the Joint International Congress and Exhibition - Electronics Goes Green 2004, pp. 945-951, Berlin, Germany, September 6-8 2004.

Prognostics and Health Management for Avionics, Wilkinson, C., Humphrey, D., Vermeire, B., and Houston, J., IEEE Aerospace Conference, Big Sky, MT, Mar. 2004.

Life Consumption Monitoring for Electronics Prognostics, S. Mishra, S. Ganesan, M. Pecht and J. Xie, Proceedings of the IEEE Aerospace Conference, Vol. 5, pp. 3455 - 3467. March 6-13, 2004.

Application of In-Situ Health Monitoring and Prognostic Sensors, J. Xie and M. Pecht, 9th Pan Pacific Microelectronics Symposium Exhibits and Conference, Kahuku, Oahu, Hawaii, 10-12 February 2004.

Load Characterization during Transportation, A. Ramakrishnan and M. Pecht, Microelectronics Reliability, Vol. 44, No. 2, pp. 333-338, January 2004.

Automated Structural Health Monitoring System Using Acoustic Emission and Modal Data, Mal, A. K., Banerjee, S. and Ricci, F., Proceedings of SPIE, vol. 5394, pp. 1-10, 2004.

Same Data, More Value: Multivariate Sensor Signal Monitoring, Kerastas, J., Leah, R., Sensors Magazine Online, March 2004.

rognostic Health Management, Radke, J., Honeywell Capabilities and Needs, 6 December, 2004.

2003

Health Monitoring in the Home of the Future, Korhonen, I., Parkka, J. and Gils, M.IEEE Engineering Medicine and Biology Magazine, pp. 66-73, vol. 22, no. 3, May/June 2003.

Dynamically Self-Validating Contact Temperature Sensors, Barberree, D. A., Eighth Temperature Symposium, AIP Conference Proceedings, Vol. 684, pp. 1097-1102, September, 2003.

Prognostics for Advanced Compressor Health Monitoring, Krok, M. J., and Goebel, K., Proceedings of SPIE, Vol. 5107, pp. 1-12, 2003.

Condition Monitoring Techniques for Electrical Equipment -A Literature Survey, Han, Y., Song, Y. H., IEEE Transaction on Power Delivery, Vol. 18, no. 1, pp. 4-13, January, 2003.

Technology Update I: Wiring Prognostic Tools, Teal, C. and Larsen, W., Digital Avionics Systems Conference, Vol. 2, pp. 11.E.1- 11.1-7, Oct. 12-16, 2003.

Wireless e-Diagnostics Reduces Workload and Improves Shipboard Quality of Life, Ploeger, R., Newton, W. W., Rabiner, A., and Lally, R., White Paper, Oceana Sensor Technologies, Virginia Beach,VA, 2003.

Indirect Assessment of System Reliability, Ebrahimi, N. B., IEEE Transactions on Reliability, vol. 52, no. 1, pp. 58-62, March, 2003.

Model-Based Prognostic Techniques, Luo, J., Namburu, M., Pattipati, K., Qiao, L., Kawamoto, M., and Chigusa, S., Proceedings of the 2003 IEEE Systems Readiness Technology Conference (AUTOTESTCON), pp. 330-340, Sept. 22-25, 2003.

A Testbed for Data Fusion for Helicopter Diagnostics and Prognostics, Brotherton, T., Friend, R., Sotomayer, B., and Berry, J., Proceedings of IEEE Aerospace Conference, Big Sky, , Montana, March 2003.

Two-Tiered Wireless Sensor Network Architecture for Structural Health Monitoring, Kottapalli, V., kiremidjian, A. S., Lynch, J. P., Carryer, E., Kenny, T. W., Law, K. H., and Lei, Y., SPIE 10th Annual Symposium on Smart Structures and Materials, San Diego, USA. March 2-6, 2003.

Enhancing the Quality of Life Through Wearable Technology, Park, S. and Jayaraman, S., IEEE Engineering in Medicine and Biology Magazine, vol. 22, pp. 41-48, May, 2003.

Nanotechnology's impact on aircraft design and maintenance, Kirkland, L. V. and Wright, R. G., Aerospace and Electronic Systems Magazine, IEEE, , vol. 18, no. 4, pp. 9-13, 2003.

Spectral Decomposition of Performance Variables for Dynamic System Characterization of Web Servers, Gross, K. C., Lu, W. and Mishra, K., Proceedings of the 2003 SAS Users Group International (SUGI 28), Seattle, Washington, Mar 30 - Apr 2, 2003.

SEE Characterization of Vertical DMOSFETs: An Updated Test Protocol, Titus, J. L. and Wheatley, C. F., IEEE Transactions on Nuclear Science, vol. 50, no. 6, pp. 2341-2351, December, 2003.

Simulation Study of Single-Event Gate Rupture Using Radiation-Hardened Stripe Cell Power MOSFET structures, Titus, J. L., Su, Y. S., Savage, M. W., Mickevicius, R. V. and Wheatle, C. F., IEEE Transactions On Nuclear Science, vol. 50, no. 6, pp. 2256-2264, December, 2003.

MSET Performance Optimization for Detection of Software Aging, Vaidyanathan, K., and Gross, K., Fast Abstract ISSRE, 2003.

Onboard Prognostic System for Microstructural- based Reliability Prediction, Nasser, L. and Tryon, R., Proceedings of the 2003 IEEE Aerospace Conference, pp. 1-7, 2003.

The implementation of advanced diagnostic and prognostic concepts-Practical tools for effective Diagnostic and Prognostic Health Management, Callan, R., Larder, B. and Aerospace, S., Proceedings of the 2003 Aerospace Conference, vol.7, pp. 3165-3175, 2003.

Stator Winding Turn-fault Detection for Closed-loop Induction Motor Drives, Tallam, R. M., Habetler, T. G. and Harley, R. G., IEEE Transactions on Indistry Applications, vol. 39, No. 3, pp. 720-724, May/June 2003.

Embedded Diagnostic/Prognostic Reasoning and Information Continuity for Improved Avionics Maintenance, Byington, C. S., Kalgren, P. W., Johns, R., and Beers, R. J., Proceedings of AUTOTESTCON 2003, Anaheim, California, pp. 320-329, September 22-25, 2003.

Condition Monitoring Techniques for Electrical Equipment- A Literature Survey, Han, Y. and Song, Y. H., IEEE Transactions on Power Delivery, vol. 18, Issue1, pp. 4-13, 2003.

Nano-Scaled Electrical Sensor Devices for Integrated Circuit Diagnostics, Wright, R.G. and Kirkland, L.V., Proceedings of the 2003 IEEE Aerospace Conference, vol. 6, pp. 2549-2555, 2003.

Failure Diagnosis of Integrated Circuits Using IR Laser Images, Keenan, E., Wright, R.G. and Kirkland, L.V., Proceedings of the 2003 IEEE Aerospace Conference, vol.6, pp. 2557-2564, 2003.

Functional Circuit Board Testing Using Nanoscale Sensors, Wright, R. G., Zgol, M., Adebimpe, D. and Kirkland, L. V., AUTOTESTCON 2003, IEEE Systems Readiness Technology Conference, pp. 266- 272, 2003.

Latin Hypercube Sampling and the Propagation of Uncertainty in Analyses of Complex Systems, Helton, J. C. and Davis, F. J., Reliability Engineering and System Safety, vol. 81, pp. 23-69, 2003.

Models and Model Uncertainty in the Context of Risk Analysis, Nilsen, T., Aven, T, Reliability Engineering & System Safety, vol. 79, Issue 3, pp. 309-317, Mar 2003.

Evaluation of Bayesian Networks Used for Diagnostics, Przytula, K. W., Dash, D. and Thompson, D., Proceedings of IEEE Aerospace Conference, vol. 7, pp. 3177-3187, 2003.

Review Paper: Health Monitoring of Civil Infrastructure, Chang, P. C., Flatau, A. and Liu, S. C., Structural Health Monitoring, 2(3), 257每267, 2003.

Statistical Analysis of Wind Turbine Inflow and Structural Response Data from the LIST Program, Nelson, L. D., Manuel, L., Sutherland, H. J. and Veers, P. S., Journal of Solar Energy Engineering, vol. 125, pp.541-550, 2003.

Understanding the Effect of Dwell Time on Fatigue Life of Packages Using Thermal Shock and Intrinsic Material Behavior, Sahasrabudhe, S., Monroe, E., Tandon, S. and Patel, M., Electronic Components and Technology Conference, pp.898-904, 2003.

Packaging Effects on the Performances of MEMS for High-G Accelerometer with Double-Cantilevers, Zhaonian, C., Weidong, H., Xia, C., Bulu, X., Luo, L., and Xinxin, L., Sensors and Actuators A, vol. 102, pp. 268-278, 2003.

Cyclic Statistics in Rolling Bearing Diagnosis, Li, L. and Qu, L., Journal of Sound and Vibration, vol. 267, pp. 253-365, 2003.

Methods for Predicting the Remaining Life of Electronic Assemblies with Carbon Nanotubes and an Optical Transduction Technique, P. Casey, S. Ganesan, M. Pecht and D. Anand, Proceeding of IMECE' 03 - 2003 ASME International Mechanical Engineering Congress, Washington, D.C. November 15-21, 2003.

A Life Consumption Monitoring Methodology for Electronic Systems, Ramakrishnan, A. and Pecht, M., IEEE Transactions on Components and Packaging Technologies, Vol. 26, No. 3, pp. 625-634, September 2003.

Remaining Life Assessment of Aging Electronics in Avionic Applications, R. Valentin, M. Osterman, B. Newman, The Annual Reliability and Maintainability Proceedings, pp. 313-318, Tampa, Florida, January 27-30, 2003.

Damage Detection in Structures from Vibration and Wave Propagation Data, Mal, A. K., Ricci, F., Gibson, S. and Banerjee, S., Proceedings of SPIE, vol. 5047, pp. 202-210, 2003.

Input Model Uncertainty: Why Do We Care and What Should We Do About It?, Henderson, S. G., S. Chick, P. J. Sanchez, D. Ferrin and D. J. Morrice (eds.), Proceedings of the 2003 Winter Simulation Conference, pp. 90-100, 2003.

2002

Advanced Pattern Recognition for Detection of Complex Software Aging Phenomena in Online Transaction Processing Servers, Cassidy, K., Gross, K. C., and Malekpour, A., Proceedings of the International Conference on Performance and Dependable Systems and Networks, pp. 478-482, 2002.

Health Management System Design: Development, Simulation and Cost/Benefit Optimization, Kacprzynski, G. J., and Hess, A. J., IEEE, Big Sky, MT, March 2002.

Prognostics, from the Need to Reality-from the Fleet Users and PHM System Designer/Developers Perspectives, Hess, A., and Fila, L., Aerospace Conference Proceedings, Vol. 6, pp. 2791 每 2797, 2002.

Structural Health Monitoring Using the Semantic Wireless: A Novel Application for Wireless Networking, Kinawi, H., Taha, M. M. R., El-Sheimy, N., Proceedings of 27th Annual IEEE Conference on Local Computer Networks, Los Alamos, CA, USA, pp. 770-778, 2002.

BIT for Intelligent System Design and Condition Monitoring, Gao, R.X., and Suryavanshi, A., IEEE Transactions on Instrumentation and Measurement, vol. 51, no. 5, pp. 1061-1067, October, 2002.

Data Mining Technology for Failure Prognostic of Avionics, Skormin, V. A., Gorodetski, V. I., and Popyack, L. J., IEEE Transactions on Aerospace and Electronic Systems, vol. 38, no. 2, pp. 388-403, April, 2002.

Real-time, Embedded Diagnostics and Prognostics in Advanced Artillery Systems,, Araiza, M. L., Kent, R. and Espinosa, R., AUTOTESTCON Proceedings, IEEE, pp. 818-841, 2002.

Joint Advanced Health and Usage Monitoring System (JAHUMS), Haas, D. J., Baker, T. and Bailer, M., Advanced Concept Technology Demonstration (ACTD), 2002.

Advanced Pattern Recognition for Detection of Complex Software Aging Phenomena in Online Transaction Processing Servers, Cassidy, K. J., Gross, K. C. and Malekpour, A., Proceedings of the International Conference on Dependable Systems and Networks, 2002.

The Development and Demonstration of a Probabilistic Diagnostic and Prognostic System (ProDAPS) for Gas Turbines, Callan, R., Larder, B., Syst, E., Aerosp, S. and Eastleigh, U. K., Proceedings of the 2002 IEEE Aerospace Conference, vol. 6, pp. 3083-3094, 2002.

Integrated vehicle health management for aerospace platforms, Ofsthun, S., Instrumentation & Measurement Magazine, IEEE, vol. 5, No.3, pp. 21- 24, 2002.

Diagnosis of Component Failures in the Space Shuttle Main Engines Using Bayesian Belief Networks: A Feasibility Study, Liu, E. and Zhang, D., Proceedings. 14th IEEE International Conference on Tools with Artificial Intelligence, pp. 181-188, 2002.

Proactive Detection of Software Aging Mechanisms in Performance Critical Computers, Gross, K.C., Bhardwaj, V., and Bickford, R., Proceedings of the 27th Annual NASA Goddard/IEEE Software Engineering Workshop, pp. 17-23, 5-6 Dec. 2002.

Heuristic, systematic, and informational regularization for process monitoring, Gribok, A. V., Hines, J. W., Urmanov, A. and Uhrig, R. E., International Journal of Intelligent Systems, vol. 17, Issue 8, pp. 723-749, August, 2002.

Structural Monitoring of a Bending Beam Using Brillouin Distributed Optical Fiber Sensors, Kim, S. H., Lee, J. J. and Kwon, I. B., Smart Materials and Structures, vol. 11, pp. 393-403, 2002.

Structural Fatigue Life Prediction with System Uncertainties, Wang, X., Sun, J. Q., Journal of Sound and Vibration, 257(5), pp. 977-984, 2002

Identification and Review of Sensitivity Analysis Methods, Frey, H.C., and R. Patil, Risk Analysis, vol. 22, No. 3, pp. 553-577, 2002.

Enhancement of physics-of-failure prognostic models with system level features, Kacprzynski, G.J., Roemer, M.J., Modgil, G., Palladino, A., IEEE Aerospace Conference Proceedings (Cat. No.02TH8593). vol. 6, pp. 2919-2925, Piscataway, NJ, USA: 2002.

Bayesian Updating of Damage Size Probabilities for Aircraft Structural Life-Cycle Management, Rusk, D. T., Lin, K. Y., Swartz, D. D., and Ridgeway, G. K., Journal of Aircraft, vol. 39, No. 4, pp. 689-696, July- August 2002.

Comparing Fatigue Life Estimates Using Experimental and Spectral Density Based Probability Distributions, Spottswood, S. M., Wolfe, H. F., Journal of Aircraft, vol. 39, No. 3, pp. 493-498, May 每 June 2002.

Using Life-Cycle Information for Reliability Assessment of Electronic Assemblies, Middendorf, A., Griese, H., Reichl, H., and Grimm, W., IEEE International Integrated Reliability Workshop, pp. 21-24, Lake Tahoe, CA, USA, Oct. 2002.

Damage Accumulation in Glass Plates, Gioffre, M., and Gusella, V., Journal of Engineering Mechanics, pp. 801-805, July 2002.

A Power Law Model for Assesment of Hot Electron Reliability in GaAs MESFETs and AlGaAs/InGaAs pHEMTs, Kaper, V. and Ersland, P., 2002 GaAs MANTECH Conference, http://www.gaasmantech.org/Digests/2002/PDF/03d.pdf, 2002.

SMT Solder Joint's Semi-experimental Fatigue Model, Guo, Q., Zhao, M., and Wang, H. F., Mechanics Research Communications, vol. 32, pp. 531-358, 2002.

Reliability of PBGA Assemblies Under Out-of-Plane Vibration Excitations, Yang, Q.J., Wang, Z. P., Lim, G. H., Pang, J. H., Yap, F. F., and Lin, R. M., IEEE Trans. on Components and Packaging Technologies, vol. 25, no. 2, pp. 293-300, June 2002.

Mechanical Response of PCBs in Portable Electronic Products During Drop Impact, Seah, S. K. W., Lim, C. T., Wong, E. H., Tan, V. B. C., and Shim, V. P. W., The Proceedings of the 4th Conference on Electronics Packaging Technology, IEEE, Singapore, pp. 120-125, Dec. 10每12, 2002.

Micro-mechanics of Creep-fatigue Damage in PB-SN Solder due to Thermal Cycling〞Part II: Mechanistic Insights and Cyclic Durability Predictions from Monotonic Data, Sharma, P. and Dasgupta, A., Transactions of the ASME, Journal of Electronic Packaging, vol. 124, no. 3, pp. 298-304, 2002.

Early Detection of Signal and Process Anomalies in Enterprise Computing Systems, Kenny C. Gross, Wendy Lu, Proceedings of the 2002 IEEE International Conference on Machine Learning and Applications, pp. 204-210, Las Vegas, NV, June 2002.

Time-Series Investigation of Anomalous CRC Error Patterns in Fibre Channel Arbitrated Loops, Gross, K. C., Lu, W., Huang, D., Proceedings of the 2002 IEEE International Conference on Machine Learning and Applications, pp. 211-215, 2002.

Airlines are Making Money by Maintaining their Aircraft to Higher Standards, Kinnison, H., Flight Safety Australia, pp. 40-43, 2002.

Virtual Life Assessment of Electronic Hardware Used in the Advanced Amphibious Assault Vehicle (AAAV), R. Valentin, J. Cunningham, M. Osterman, A. Dasgupta, M. Pecht and D. Tsagos, Proceedings of the 2002 Winter Simulation Conference, Vol. 1, pp. 948-953, San Diego, California, December 8-11, 2002.

Aging Aircraft Usable Life and Wear-out Issues, D., Humphrey, W. Shawlee, P. Sandborn, D. Lorenson, Proc. World Aviation Congress (SAE Technical Paper: 2002-1-3013), Phoenix, AZ, November 2002.

Remaining Life Assessment of Shuttle Remote Manipulator System End Effector Electronics Unit, V. Shetty, D. Das, M. Pecht, D. Hiemstra and S. Martin, Proceedings of the 22nd Space Simulation Conference, Ellicott City, MD, October 21-23, 2002.

Remaining Life Prediction of Electronic Products Using Life Consumption Monitoring Approach, S. Mishra, M. Pecht, T. Smith, I. McNee, and R. Harris, Proceedings of the European Microelectronics Packaging and Interconnection Symposium, pp. 136-142, Cracow, June 16-18, 2002.

In-situ Sensors for Product Reliability Monitoring, Mishra, S. and Pecht, M., Proceedings of SPIE, Vol. 4755, pp. 10-19, 2002.

Illustration of Sampling-Based Methods for Uncertainty and Sensitivity Analysis, Helton, J., C. and Davis, F., J., Risk Analysis, Vol. 22, No. 3, pp. 591-622, 2002.

Characteristics and Tables of the Left-truncated Normal DistributionJohnson, A. C., and Thomopoulos, N., Proceedings of the Midwest Decision Sciences Institute, pp.133-139, 2002.

A Prognostic Development Methodology with Demonstration ExamplesHardman, B., DARPA/DSO Prognosis Bidder's Conference, Alexandria, VA, September 26-27, 2002.

Automated Diagnostics and Prognostics for Aging Aircraft Structures and Wiring Systems, SAE DoD Conference, Reno, NV, October, 2002.

Time-Series Investigation of Anomalous CRC Error Patterns in Fiber Channel Arbitrated LoopsGross, K. C., Lu, W., Huang, D., Proceedings of the 2002 IEEE International Conference on Machine Learning and Applications, pp. 211-215, 2002.

Embedded Prognostics Health Monitoring, Greitzer, F. L. and Pawlowski, R. A., Proceedings of the International Instrumentation Symposium Embedded Health Monitoring Workshop, May 2002.

2001

Improved Diagnostic and Prognostic Assessments Using Health Management Information Fusion, Roemer, M. J.,Kacprzynski, G. J., Schoeller, M. H., Proceedings of 2001 IEEE AUTOTESTCON Systems Readiness Technology Conference, pp.365-377, 2001.

Structure Health Monitoring by Electrical Resistance Measurement, Chung, D. D. L., Smart Materials and Structures, vol. 10, no. 4, pp. 624-636, November, 2001.

Instrumentation of a Wireless Transmission System for Health Monitoring of Large Infrastructures, Wang, D. H. and Liao, W. H., Proceedings of the 18th IEEE Instrumentation and Measurement Technology Conference, Piscataway, NJ, USA, IEEE, vol. 1, pp. 634-639, May 23-23, 2001.

Design and Performance of Wireless Sensors for Structural Health Monitoring, Watters, D. G., and Jayaweera, P., Review of Progress in Quantitative Nondestructive Evaluation. Brunswick, MN, USA, 29 July- 3Aug, 2001.

Using Higher Organisms in Biological Early Warning Systems for Real-Time Toxicity Detection, van der Schalie, W. H., Shedd, T. R., Knechtges, P. L. and Widder, M. W., Biosensors and Bioelectronics,, vol. 16, pp. 457-465, 2001.

Integrated Reliability Analysis, Diagnostics and Prognostics for Critical Power Systems, Tu, F., Azam, M.S., Shlapak, Y., Pattipati, K., Karanam, R., Amin, S., AUTOTESTCON Proceedings, 2001, IEEE Systems Readiness Technology Conference, pp. 416-440, 2001.

Fault Prognosis Using Dynamic Wavelet Neural Networks, Vachtsevanos, G. and Wang, P., AUTOTESTCON, Proceedings of 2001 IEEE Systems Readiness Technology Conference, pp. 857-870, 2001.

A Wavelet Neural Network Framework for Diagnostics of Complex Engineered Systems, Vachtsevanos, G., Wang, P. and Echauz, J., Proceedings of the 2001 IEEE International Symposium on Intelligent Control,, pp. 79-84, Sept. 5-7, 2001.

Anomaly Detection and Reasoning with Embedded Physical Model, Jaw, L. C. and Wu, D. N., Proceedings of the 2004 IEEE Aerospace Conference, vol. 6, pp. 3073-3081, March 2002.

ICEMS: A Platform for Advanced Condition-based Health Management, Jaw, L. C. and Friend, R., Proceedings of the 2001 IEEE Aerospace Conference, vol. 6, pp. 2909-2914, March 10-17, 2001.

Putting CBM and EHM in Perspective Jaw, L., Maintenance Technology, pp. 14-18, Nov. 2001.

Automated Helicopter Vibration Diagnostics for the US Army and National Guard, Grabill, P., and Berry, J., American Helicopter Society 57th Annual Forum, Washington, DC, 2001.

Ways and Options for Aircraft Structural Health Management, Boller, C., Smart Materials and Structures, vol. 10, pp. 432-440, 2001.

Extending FMECA-Health Management Design Optimization for Aerospace Applications, Kacprzynski, G. J., Roemer, M. J., Hess, A. J. and Bladen, K. R., Proceedings of the 2001 IEEE Aerospace Conference, vol.6, pp. 3105-3112, 2001.

Assessment of Data and Knowledge Fusion Strategies for Prognostics and Health Management, Roemer, M. J., Kacprzynski, G. J. and Orsagh, R. F., Proceedings of the 2001 IEEE Aerospace Conference, vol.6, pp. 2979-2988, Big Sky, Montana, 2001.

Monitoring of Fatigue Damage of Composite Structures by Using Embedded Intensity-Based Optical Fiber Sensors, Lee, D. C., Lee, J. J., Kwon, I. B., and Seo, D. C., Smart Materials and Structures, vol. 10, pp. 285-292,2001.

Development of diagnostic and prognostic technologies for aerospace health management applications, Roemer, M. J., Nwadiogbu, E. O., and Bloor, G., IT LLC, NY, Aerospace Conference, 2001, IEEE Proceedings, vol.6, pp. 3139-3147, 2001

Fault Detection Using RBFN-and AR-Based General Parameter Methods, Dote, Y., Ovaska, S. J. and Gao, X., IEEE International Conference on Systems, Man, and Cybernetics, vol.1, pp. 77-80, 2001.

A Neural Network Based Fault Detection and Identification Scheme for Pneumatic Process Control Valves, Karpenko, M. and Sepehri, N., IEEE International Conference on Systems, Man, and Cybernetics, vol.1, pp. 93-98, 2001.

Nanotechnology-Based Molecular Test Equipment (MTE), Wright, R.G., Zgol, M., Keeton, S. and Kirkland, L.V., IEEE Aerospace and Electronic Systems Magazine, vol. 16, No.6, pp. 15-19, June 2001.

Case Study Methodology for Information Fusion Interface definition, Ferrell, B.L.,Cruickshank, J.L.,Gilmartin, B.J., Massam, S.J., Fisher, C. and Gass, F.D., Proceedings of the 2001 IEEE Aerospace Conference, vol.6, pp. 3003-3015, 2001.

Prognostic Methodology for Deep Submicron Semiconductor Failure Modes, Goodman, D.L., IEEE Transactions on Components and Packaging Technologies, vol. 24, No.1, pp. 109-111, March 2001.

Monitoring Structural Health Using a Probabilistic Measure, Beck, J. L., Au, S. K., and Vanik, M. W. Computer Aided Civil Infrastructure Engineering, vol. 16, pp. 1-11, 2001.

Integration of Computation and Testing for Reliability Estimation, Zhang, R., Mahadevan, S., Reliability Engineering and System Safety, vol. 74 (1), pp. 13-21, 2001.

A framework for Assessing Confidence in Computational Predictions, Hanson, K.M., Hemez, F.M., Experimental Techniques, vol. 25, No. 4, pp. 50-55,2001.

Overview of Uncertainty Assessment for Structural Health Monitoring, Doebling, S., and Hemez, F., Proceedings of 3rd International Workshop on Structural Health Monitoring, Stanford University, California, September 17-19, 2001.

Assessment of Data and Knowledge Fusion Strategies for Prognostics and Health Management, Roemer, M. J., Kacprzynski, G.J. and Orsagh, R.F, IEEE Aerospace Conference Proceedings, vol. 6, pp. 6-2979-6-2988, 2001.

Predicting Remaining Life of Mechanical Systems, Greitzer, F. L. and Ferryman, T. A., ASME Intelligent Ship Symposium IV, Philadelphia, Pennsylvania, April 2-3, 2001.

Measurement Accuracy: How Much is Necessary?, Zschokke, S. and E. Lu“din., Bulletin of the Ecological Society of America, vol. 82, pp. 237每243, October 2001.

Evaluation of Built-In Test, M. Pecht, M. Dube, M. Natishan, and I. Knowles, IEEE Transactions on Aerospace and Electronic Systems, Vol. 37, No. 1, pp. 266-272, January 2001.

Structural Health Monitoring Methodology for Aircraft Condition-Based Maintenance, Saniger, J., Reithler, L., Guedra-Degeorges, D., Takeda, N. and Dupuis, J. P., Proceedings of SPIE 2001, vol. 4332, pp. 88-97, 2001.

Challenges Facing Equipment Condition Monitoring Systems, Wegerich, S., Singer, R., Herzog, J., and Wilks, A., Maintenance and Reliability Conference, Gatlinburg, Tennessee, May 2001.

Selecting a Temperature Time History for Predicting Fatigue Life of Microelectronics Solder Joints, Basaran. C., Dishongh, T., and Zhao, Y., Journal of Thermal Stresses, vol. 24, No. 11, pp. 1063-1084, November,2001.

Enhanced Electronic System Reliability 每 Challenges for Temperature Prediction, Parry, J., Rantala, J., and Lasance, C. J. M., Proceedings of 7th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC), pp. 29-35, 2001.

Helicopter Operations Monitoring Programme, A Helicopter Flight Data Monitoring Programme, Smiths, 2001.

2000 and prior

Aircraft Health Monitoring Using Optical Fiber Sensors, Borinski J. W., Meller, S.A., Pulliam W.J., Murphy, K. A. and Schetz, J, Digital Avionics Systems Conferences, 2:6D1/1‵6D1/8, 2000.

Structural Health Monitoring: Degradation Mechanisms and System Requirements, Munns, T.E. and Kent, R.M., Digital Avionics Systems Conferences, pp. 6C2/1-6C2/8, vol. 2, 2000.

Lessons Learned from Rotary-and Fixed-Wing HUMS Applications, Gill, J., Proceedings of 2000 IEEE Aerospace Conference, Vol. 6, pp. 423-431, 2000.

Wavelet Packet Feature Extraction for Vibration Monitoring, Yen, G. G., and Lin, K. C., IEEE Transactions on Industrial Electronics, vol. 47, no. 3, pp. 650-667, June, 2000.

A Practical Implementation of BICS for Safety-Critical Applications, Smith, P. A. and Campbell, D. V., 2000 IEEE International Workshop on Defect Based Testing, pp. 51-56, 2000.

Optimal Clustering and Statistical Identification of Defective ICs using IDDQ Testing, Rao, A., Jayasumana, A. P., and Malaiya, Y. K., 2000 IEEE International Workshop on Defect Based Testing, pp. 30-35, 2000.

Thermal Modeling of Power-Electronic Systems, Application Note, Marz, M. and Nance, P., Fraunhofer Institute for Integrated Circuits, , 2000.

Complementary Model for Intrinsic Time-Dependent Dielectric Breakdown in SiO2 Dielectrics, McPherson, J. W., Khamankar, R. B. and Shanware, A., Journal of Applied Physics, vol. 88, no. 9, pp. 5351-5329, 2000.

Sensor Fault Detection in Nuclear Power Plants Using Multivariate State Estimation Technique and Support Vector Machines, Zavaljevskl, N. and Gross, K. C., Third International Conference of the Yugoslav Nuclear Society YUNSC 2000, Belgrade, Yugoslavia, October 2-5, 2000.

Shipboard Machinery Diagnostics and Prognostics/Condition Based Maintenance: A Progress Report,, Hadden, G. D., Bergstrom, P., Vachtsevanos, G. and Bennett, B. H., Proceedings of the 2000 IEEE Aerospace Conference Proceedings, pp. 277-292, 2000.

Smith Industries HUMS: Changing the M from Monitoring to Management, Larder, B., Azzam, H., Trammel, C. and Vossler, G., 2000 IEEE Aerospace Conference Proceedings, pp. 449-455, 2000.

Advanced Diagnostics and Prognostics for Gas Turbine Engine Risk Assessment, Roemer, M. J., and Kacprzynski, G. J., Proceedings of the 2000 IEEE Aerospace Conference, vol.6 pp. 345-353, 2000.

Shipboard Machinery Diagnostics and Prognostics/Condition Based Maintenance: A Progress Report, Hadden, G. D., Vachtsevanos, G., Bennett, B. H. and Dyke, J. V., Proceedings of the 2000 IEEE Aerospace, vol. 6, pp.277-292, 2000.

Monitoring of Fatigue Crack Growth in Steel Structures Using Intensity-based Optical Fiber Sensors, Lee, D. C., Lee, J. J., and Kwon, I. B., Journal of Intelligent Material Systems and Structures, vol. 11, pp. 100-107, Feb. 2000.

Progress in Turbomachinery Prognostics and Health Management via Eddy-Current Sensing, Dowell, M., Sylvester, G., Krupp, R. and Zipfel, G., Proceedings of the 2000 IEEE Aerospace Conference, vol.6, pp. 133-143, 2000.

Air Vehicle Prognostics and Health Management, Ferrel, B. L., Proceedings of the 2000 IEEE Aerospace Conference, vol. 6, pp. 145-146, 2000.

Prognostics, The Real Issues Involved with Predicting Life Remaining, Engel, S. J., Gilmartin, B. J., Bongort, K. and Hess, A., Proceedings of 2000 IEEE Aerospace Conference, pp.457-469, 2000.

Prognostic Techniques for Semiconductor Failure Modes, Goodman, D.L., Ridgetop Group Inc., www.ridgetop-group.com, 2000.

Life Cycle Data Acquisition Unit 每 Design, Implementation, Economics and Environmental Benefits, Simon, M., Graham, B., Moore, P., JunSheng, P., Changwen, X., Proceedings of the 2000 IEEE International Symposium on Electronics and the Environment, pp. 284-289, Piscataway, NJ, USA, 2000.

Prognostics, The Real Issues Involved With Predicting Life Remaining, Engel, S. J., Gilmartinn, B. J., Bongort, K. and Hess, A., IEEE Aerospace Conference, vol.6, pp. 457-469, 2000.

Thermomechanical Behavior of Micron Scale Solder Joints Under Dynamic Loads, Zhao, Y., Basaran, C., Cartwright, A. N. and Dishongh, T., Mechanics of Material, vol. 32, pp. 161-173, 2000.

Thermal Design of an Ultraslim Notebook Computer, Kobayashi, T., Ogushi, T., Sumi, N. and Fujii, M., IEEE Transactions on Components and Packaging Technology, vol. 23, pp. 6-13, Mar. 2000.

Assessment of Condition-Based Maintenance in the Department of Defense, Butcher, S. W., Logistics Management Institute, McLean, VA, 2000.

Feature Extraction Based on Morlet Wavelet and Its Application for Mechanical Fault Diagnosis, Lin, J. and Qu, L., Journal of Sound and Vibration, vol. 234, No. 1, pp. 135-148, 2000.

An Uncertainty Propagation Methodology that Simplifies Uncertainty AnalysesMeyn, L. A., AIAA-2000-149, Aerospace Sciences Meeting and Exhibit, 38th, Reno, NV, Jan. 10-13, 2000.

Wavelet Transform Based Sensor Validation, Ma, J., Zhang, J. Q., and Yan, Y., IEE Colloquium Digest, Oxford, pp. 10/1每10/4, June 1999.

Condition monitoring and fault diagnosis of electrical machines〞A review, Nandi, S., and Toliyat, H. A., Proceedings of IEEE-IAS Annual Meeting, Phoenix, AZ, pp. 197-204, vol. 1, 1999.

Serial Communication and Embedded Sensors on Bearings and Gear Reducers for Increased Productivity, El-Ibiary, Y., Cement Industry Technical Conference, 1999, Conference Record, 1999 IEEE-IAS/PCA, pp. 49-53, April 11-15, 1999.

Temporal Sequence Learning and Data Reduction for Anomaly Detection, Lane, T. and Brodley, C. ACM Transactions on Information and System Security, vol. 2, no. 3, pp. 295-331, August, 1999.

Equivalent Life Distribution and Fatigue Failure Probability Prediction, Xie, L., International Journal of Pressure Vessels and Piping, vol. 76, pp. 267-273, 1999.

Three State-of-the-Art Methods for Condition Monitoring, Grimmelius, H. T., Meiler, P. P., Maas, L. M. M., Bonnier, B., IEEE Transactions on Industrial Electronics, vol. 46, no. 2, pp. 407-416, April, 1999.

A Survey of Aircraft Engine Health Monitoring Systems, Tumer, I. and Bajwa, A., 35th Joint Propulsion Conference, AIAA-99-2528, June, 1999.

The State of Machining Process Monitoring Research in Korea, Cho, D. W., Lee, S. J. and Chu, C. N. International Journal of Machine Tool and Manufacture, pp. 1697-1715, 39(11), 1999.

Condition Monitoring and Fault Diagnosis of Electrical Machines- A Review, Nandi, S. and Toliyat, H. A., Industry Applications Conference, 34th Annual Meeting, vol. 1, pp. 197-204, 1999.

Development of New Health and Usage Monitoring System Tools Using a NASA/Army Rotorcraft, Ellerbrock, P. J., Halmos, Z. and Shanthakumaran, P., Presented at the American Helicopter Society 55th Annual Forum, Montreal, Canada, May 25-27, 1999.

Turbine Engine Health Monitoring and PrognosticsGreitzer, F. L., Kangas, L. J., Terrones, K. M., Maynard, M. A., Wison, B. W., Pawlowski, R. A., Sisk, D. R. and Brown, N. B., International Society of Logistics (SOLE) 1999 Symposium, Las Vegas, Nevada, August 30-September 2, 1999.

The Development and Integration of Novel Sacrificial Wear Sensors into the Quarrying Industry, Yaxley, S. J., and Knight, J. A. G., Sensors and Actuators A, vol. 75, no. 1, pp. 24-34, May, 1999.

1.5 volts Iddq/Iddt Current Monitor, Pecuh, I., Margala, M. and Stopjakova, V., Proceedings of the 1999 IEEE Canadian Conference on Electrical and Computer Engineering, Shaw Conference Center, Edmonton, Canada, May 9-12, 1999.

An Integrated Approach to Machine Fault Diagnosis, Wang, P., Propes, N., Khiripet, N., Li, Y., and Vachtsevanos, G., Proceedings of the IEEE Annual Textile Fiber and Film Industry Technical Conference, Atlanta, pp. 1-7, May 4-6, 1999.

Gas Turbine Engine Health Monitoring and Prognostics, Greitzer, F. L., Kangas, L. J., Terrones, K. M., Maynard, M. A., Wison, B. W., Pawlowski, R. A., Sisk, D. R. and Brown, N. B., International Society of Logistics (SOLE) 1999 Symposium, Las Vegas, Nevada, August 30-September 2, 1999.

Neural Networks for Model-Based Prognostics, Jaw, L. C., Proceedings of the 1999 IEEE Aerospace Conference, pp. 21-28, March 6-13, 1999.

The Joint Acceptance Demonstration of Fault Detection and Isolation of the Guided Weapons Test Station, Lohse, J. L., AUTOTESTCON'98, pp.35-42, 1998.

Current Signatures: Application, Gattiker, A. E., and Maly, W., Proceedings of the International Test Conference, pp. 1168-1177, October 18-23, 1998.

Fault-Tolerance Improvement for a MSET Model of the Crystal River-3 Feedwater Flow System, Miron, A., Wegerich, S., Yue, F., Gross, K., Christenson, J., IEEE, Nuclear Science Symposium, vol. 2, pp. 993-994, 1998.

Development of a Thermal Management Solution for a Ruggedized Pentium Based Notebook Computer, Rujano, J. R., Cardenas, R., Rahman, M. M. and Moreno, W. A., Proceedings of the Sixth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm-98, pp 8每14, Seattle, USA, 1998.

Vibrational Fatigue of Surface Mount Solder Joints, Jih, E., and Jung, W., The Sixth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, May 27-30, 1998.

Integrated Flow-Thermomechanical and Reliability Analysis of a Densely Packed C4/CBGA Assembly, Hong, B. Z. and Yuan, T., InterSociety Conference on Thermal Phenomena, pp.220-228, Seattle, WA, USA, May 6, 1998.

Transient Signal Analysis and Classification for Condition Monitoring of Power Switching Equipment Using Wavelet Transforms and Artificial Neural Networks, Kang, P., Birtwhistle, D., and Khouzam, K., 1998 Second International Conference on Knowledge-Based Intelligent Electronic Systems, Adelaide, Australia, April 21-23, 1998.

Bayesian and Regression Approaches to On-line Prediction of Residual Tool Life, Wiklund, H. Quality and Reliability Engineering International, vol. 14, pp. 303-309, 1998.

Predicting and Preventing Machine Failures, Becker, K. C., Byington, C. S., Forbes, N. A., and Nickerson, G. W.,The Industrial Physicist, pp. 20-23, December, 1998.

Estimation of Fatigue Damage and Fatigue Life of Components Under Random Loading, Wu, W. F., Liou, H. Y. and Tse, H. C., International Journal of Pressure Vessels and Piping, Vol. 72, Issue 3, pp. 243-249, August, 1997.

Complex Fatigue of Soldered Joints-Comparison of Fatigue Models, Bevan, M.G. and Wittig, M., Proceedings' of the 47th Electronic Components and Technology Conference, pp.127-133, 1997.

Smart Sensors and System Health Management Tools for Avionics and Mechanical Systems, Lewis, S.A. and Edwards, T.G., 16th AIAA/IEEE Digital Avionics Systems Conference, vol.2, pp. 8.5-1-8.5-7, 1997.

The Self-Validating Thermocouple11. Yang, J. C. and Clarke, D. W., IEEE Transactions on Control Systems Technologies, Vol. 5, no. 2, pp. 239-255, March 1997.

Selecting the Number of Bins in a Histogram a Decision Theoretic Approach, He, K. and Meeden, Glen, Journal of Statistical Planning and Inference, vol. 61, No. 1, pp. 49-59, 1997.

System Health Management/Vehicle Health Management for Future Manned Space Systems, Garbos-Sanders, R., Melvin, L., Childers, B. and Jambor, B., 16th Digital Avionics Systems Conference, AIAA/IEEE, vol. 2, pp.8.5-8-8.5-17, 1997.

Applying Neural Networks and Other AI Techniques to Fault Detection in Satellite Communication Systems, Elerin, L., Learoyd, C., and Wilson, B., Proceedings of the 1997 IEEE Workshop on Neural Networks for Signal Processing, pp. 617-625, 1997.

Moving Average Filters, Smith, S. W., Chapter 14 of The Scientist and Engineer's Guide to Digital Signal Processing, pp. 277-284, 1997.

Status and Trends in Transformer Monitoring, Bengtsson, C., IEEE Transactions on Power Delivery, Vol. 11, pp. 1379-1384, July 1996.

First Observations of Power MOSFET Burnout with High Energy Neutrons, Oberg, D. L., Wert, J. L., Normand, E., and Majewski, P. P., IEEE Transactions on Nuclear Science, vol. 43, no. 6, pp. 2913-920, December 1996.

SEGR: A Unique Failure Mode for Power MOSFETS in Spacecraft, Allenspach, A., Brews, J. R., Galloway, K. F., Johnson, G. H., Schrimpf, R. D., Pease, R. L., Titus, J. L., and Wheatley, C. F., Microelectronics Reliability, vol. 36, No. 11/12, pp. 1871-1874, 1996.

A Review of the Techniques Used for Modeling Single-Event Effects in Power MOSFETs, Johnson, G. H., Palau, J. M., Dachs, C., Galloway, K. F. and Schrimpf, R. D., IEEE Transactions On Nuclear Science, vol. 43, no. 2, pp. 546-560, April 1996.

A Brief Survey of Bandwidth Selection for Density Estimation, Jones, M., C., Marron, J. S. and Sheather, S., Journal of American Statistical Association, vol. 91, No. 433, pp.401-407, 1996.

Characterizing Discrete Event Timing Relationships for Fault Monitoring of Manufacturing Systems, Das, S. R. and Holloway, Proceedings of the 1996 IEEE International Conference on Control Applications Deaborn, MI, pp. 1012-1018, September 15-18, 1996.

Methods for Early Fatigue Detection, Rajic, N., and Tsoi, K., Technical Report, DSTO, DSTO-TN-0059, 1996.

Thermal Solution to Pentium Processors in TCP in Notebooks and Sub-notebooks, Xie, H., Aghazadeh, M., Lui, W. and Haley, K., IEEE Transactions on Components Packaging and Manufacturing Technology, Part A, vol. 19, No. 1, pp. 201每210, Mar. 1996.

Characterizing the Commercial Avionics Thermal Environment for Field Reliability Assessment, K. Cluff, D. Barker, D. Robbins, and T. Edwards, Proceedings-Institute of Environmental Sciences, pp. 50-57, 1996.

Analysis of the Charge Transfer of Models for Electrostatic Discharge (ESD) and Semiconductor Devices, Greason, W. D., IEEE Transactions on Industry Applications, vol. 32, no. 3, pp. 726-734, May/ June 1996.

A Pattern-Recognition-Based, Fault-Tolerant Monitoring and Diagnostic Technique, Singer, R.M., Gross, K. C., King, R.W. and Wegrich S., International Symposium on Nuclear Reactor Surveillance and Diagnostics, Avignon, France, pp. 414-422, Jun 19-23, 1995.

Thermal Analysis of Notebook Personal Computer, Hisano, K., Iwasaki, H., and Ishizuka, M., Proceedings of 1995 Japan International Electronic Manufacturing Technology Symposium, pp. 456-459, Omiya, Japan, Dec. 4每6, 1995.

Sensor Actuator and Loop Validation, Clarke, D., IEEE Control Systems, 39-45, vol. 15, 1995.

An Investigation of Solder Joint Fatigue Using Electrical Resistance spectroscopy, Constable, J. H. and Lizzul, C., IEEE Transactions on Components, Packaging, and Manufacturing Technology, vol. 18, no. 1, pp. 142-152, March 1995.

Advances in Data Reduction Techniques for Power Quality Instrumentation, Bingham, R. P., Kreiss, D. and Santoso, S., Proceedings of the 3rd European Power Quality Conference, Power Quality, Bremen, Germany, Nov. 1995.

Reliability of Flight Critical System Components and their "History of Abuse", Skormin, V. A., and Popyack, L. J., Aerospace and Electronics Conference, pp. 376-381, 1995.

Power MOS Devices: Structure Evolutions and Modelling Approaches, Rossel, P., Tranduc, H., and Charitat, G., Proceedings of the 20th Conference on Microelectronics, vol. 1, pp. 341-352, September 12-14, 1995.

Impact of Oxide Thickness on SEGR Failure in Vertical Power MOSFETs; Development of a Semi-Empirical Expression, Titus, J. L., Wheatley, C. F., Burton, D. I., Mouret, I., Allenspach, M., Brews, J., Schrimpf, R., Galloway, K. and Pease, R. L., IEEE Transactions on Nuclear Science, vol. 42, no. 6, pp. 1928-1934, December, 1995.

On-line Inspection of Surface Mount Devices using Vision and Infrared Sensors, Dar, I. M., Newman, K. E. and Vachtsevanos, G., AUTOTESTCON '95, Systems Readiness: Test Technology for the 21st Century'. Conference Record, pp. 376-384, August 8-10, 1995.

Automated Fault Detection and Identification Using a Fuzzy-Wavelet Analysis Technique, Mufti, M. and Vachtsevanos, G., AUTOTESTCON '95 'Systems Readiness: Test Technology for the 21st Century'. Conference Record, pp. 169-175, August 8-10, 1995.

Monitoring Power Supply Current and Using a Neural Network Routine to Diagnose Circuit Faults, Kirkland, L. V., and Dean, J. S., Proceedings of the IEEE Systems Readiness Technology Conference, AUTOTESTCON '94, pp. 649-651, 1994.

Single-event gate rupture in vertical power MOSFETs; an original empirical expression, Wheatley, C. F., Titus, J. L. and Burton, D. I., IEEE Transactions on Nuclear Science, vol. 41, no. 6, pp. 2152-2159, December, 1994.

Time Stress Measurement Device Use for On-board Diagnostic Support, Broadwater, S.P. and Cockey, E.A., Proceedings of IEEE AUTOTESTCON '93, pp. 251-258, September, 1993.

Electrical Resistance as an Indicator of Fatigue, Constable, J. H. and Sahay, C. IEEE Transactions on Components Packaging and Manufacturing Technology, Vol. 15, No. 5, pp. 1138-1145, December, 1992.

PWB Solder Joint Fatigue Life Calculations under Thermal and Vibrational Loading, Barker, D. B., Dasgupta, A., and Pecht, M. G., Journal of the IES, vol. 35, no. 1, pp 17-25, January 1992.

Maintenance Processor/Time Stress Measurement Device (MP/TSMD) Use for Failure Trend Analysis, Broadwater, S. P., Oblak, T.A., and Popyack, L. J., Annual Reliability and Maintainability Symposium, pp. 228-238, 1992.

Thermal Design of a Laptop Computer by a Personal Computer, Ishizuka, M., Inter Society Conference on Thermal Phenomena IEEE, pp. 184-189, 1992.

Recent Developments in Non Parametric Density Estimation, Izenman, A. J., Journal of the American Statistical Association, vol. 86, No. 413, pp. 205-213, March 1991.

A Model for Hot-Electron-Induced MOSFET Linear-Current Degradation Based on Mobility Reduction Due to Interface-State Generation, Chung, J. E., Ko, P. K. and Hu, C., IEEE Transactions on Electron Devices, vol. 38, No. 6, pp. 1362-1370, June 1991.

Compliance Metrics for the Inclined Gull-wing, Spider J-bend, and Spider Gull-wing Lead Designs for Surface Mount Components, Kotlowitz, R. W. and Taylor, L. R., IEEE Transactions on Components. Hybrids And Manufacturing Technology, vol. 14, No.4, pp.771-779, Dec., 1991.

A Model for Hot-Electron-Induced MOSFET Linear-Current Degradation Based on Mobility Reduction Due to Interface-State Generation, Chung, J. E., Ko, P. K. and Hu, C., IEEE Transactions on Electron Devices, vol. 38, No. 6, pp. 1362-1370, June 1991.

A Mechanical System Condition-based Maintenance Demonstration Model, Nickerson, G. W. and Nemarich, C. P., IEEE Systems Readiness Technology Conference, Conference Record, pp. 529-533, 1990.

Marginal Checking - A Technique to Detect Incipient Failures, Born, F. and Boenning, R. A., Proceedings of the IEEE Aerospace and Electronics Conference, pp. 1880-1886, May 22-26, 1989.

Plant-Life Extension-Remanent-Life Assessment of High-Temperature Components, Gooch, D. J., Power Engineering Journal, pp. 323-331, Nov. 1988.

Failure Prediction by Marginal Checking, Boenning, R. A., and Born, F. H., SPIE 10th Annual Symposium on Smart Structures and Materials, pp. 272-276, Jan. 26-28, 1988.

Forces, Moments and Displacements During Thermal Chamber Cycling of Leadless Ceramic Chip Carriers Soldered to Printed Boards, Hall, P. M., IEEE Transactions on Components Hybrids and Manufacturing Technology., vol. 7, no.4, pp. 314-327, 1984.

Electromigration in Thin Aluminum Films on Titanium Nitride, Blech, I. A., Journal of Applied Physics, vol. 47, no. 4, pp. 1203-1208, 1976.

On Estimating the Mean and Standard Deviation of Truncated Normal Distributions, Cohen, A. C., Journal of American Statistical Association, vol. 44(248): pp. 518每525, 1949.

Others

Power MOSFET Basics, Barkhordarian, V., Application Note AN-1084, International Rectifier, El Segundo, CA.

Improved Methods for Early Fault Detection in Enterprise Computing Servers Using SAS Tools, Gross, K. C. and Mishra, K., paper 160-29, Sun Microsystems, Inc., San Diego.

Spectral Decomposition of Performance Variables for Dynamic System Characterization of Web Servers, Gross, K. C., Schuster, E., RAS Computer Analysis Laboratory, Sun Microsystems, Inc. San Diego.

Electronic Material Microstructural, Variability-Based, Total Life Fatigue Prediction Approach, Nasser, L., Krishnan, G., and Tryon, R., VEXTEC.

Condition-Based Maintenance: Algorithms and Applications for Embedded High Performance Computing, Bennett, B. H. and Hadden, G. D., Proceedings of the 4th International Workshop on Embedded system, pp.1419-1438.

Return-on-investment (ROI) for Electronic Prognostics in MIL/AERO Systems, Goodman, D. L., Wood, S. and Turner, A., www.ridgetop-group.com

Energetic Material/Systems Prognostics, Han, D. K., Pecht, M. G., Anand, D. K., and Kavetsky, R.

Generating Random Variates from Truncated Distributions, Bziuk, W.

Concurrent Estimation of Time-to-Failure and Effective Wear, Loecher, M., and Darken, C., www.nps.navy.mil/cs/cjdarken/MARCON03.pdf.

Prognostics Research Update, M. Pecht, B. Tuchband, and N. Vichare.

Mechanical and Propulsion Systems Prognostics: U. S. Navy Strategy and Demonstration, Hardman, W.

AMS-Aerospace Monitoring and Systems-Health and Usage Monitoring system, , www.airforce-technology.com/manufacturing/ams/.

A Diagnostic Technique for CMOS ICs Based on Changes in the Quiescent Power Supply Current Caused by Toggling the InputsMay, J. T., pp. 185-187.

Equipment Maintenance Applications of Artificial Intelligence, Hintz, J. C. and Wasiuk, N. W., Electronic Progress, pp.28-33.

Onboard Health Monitoring and Prognostics for Gas Turbine Engines, Greitzer, F. L.

Value of Early Warning of Failure: Power Generation Industry Case Study, Holtan, T. P., Smart Signal Corporation.